Rug pad size calculator

Updated 10 November 2026 · Free, no sign-up

Short answer. Make the pad 5 cm smaller than the rug on each side: subtract 10 cm from both the width and the length. A 160 × 230 cm rug takes a 150 × 220 cm pad, a 200 × 290 cm rug a 190 × 280 cm pad, and a 240 × 340 cm rug a 230 × 330 cm pad.

Calculate yours

Pad size for every standard UK rug size

Rug sizePad size
50 × 80 cm40 × 70 cm
60 × 90 cm50 × 80 cm
80 × 150 cm70 × 140 cm
120 × 170 cm110 × 160 cm
160 × 230 cm150 × 220 cm
200 × 290 cm190 × 280 cm
240 × 340 cm230 × 330 cm
300 × 400 cm290 × 390 cm
60 × 180 cm runner50 × 170 cm
80 × 300 cm runner70 × 290 cm

The rule we use

The pad sits 5 cm inside the rug edge on every side, so the rug tapers to the floor and the pad stays hidden. Same rule as our rug pad guide. Measurements in centimetres, UK standard sizes as listed on our rug sizes page. Full method in how to measure a rug.

Frequently asked questions

How much smaller than the rug should a rug pad be?

5 cm on each side, so 10 cm shorter in length and width. A 200 × 290 cm rug takes a 190 × 280 cm pad. The rug edge then tapers to the floor and the pad never shows.

Can I cut a rug pad to size?

Yes. Non-slip mesh cuts cleanly with kitchen scissors; felt and rubber pads need a sharp craft knife and a straight edge. Cut on a clean floor and vacuum both sides before use.

What size pad for a round rug?

The rug diameter minus 10 cm: a 160 cm round rug takes a 150 cm round pad. Most pads are sold rectangular, so cut a circle using the rug itself as a template, then trim 5 cm all round.

Which pad works with underfloor heating?

A thin mesh or low-tog felt pad. The combined tog of rug and pad should stay low enough for heat to pass through; our underfloor heating guide covers the limits.

Other calculators